#heading(level: 2, outlined: false)[The shapes and dimensions of plunger stoppers as shown in Figure 1 are as given in Table tab:1.] <sec:5.1>
The dimension d#sub[1] shall be specified by using the selected cartridges according to ISO 13926-1 and the selected seal as per ISO 13926-3. The system can then be validated as described in ISO 11608-3.
The dimensions that refer to the plunger stopper diameters (d#sub[1], d#sub[2]. d#sub[3]) are informative.
#heading(level: 2, outlined: false)[The shapes and dimensions of plunger stoppers as shown in Figure 1 are as given in Table tab:1.] <sec:5.1>
The dimension d#sub[1] shall be specified by using the selected cartridges according to ISO 13926-1 and the selected seal as per ISO 13926-3. The system can then be validated as described in ISO 11608-3.
The dimensions that refer to the plunger stopper diameters (d#sub[1], d#sub[2]. d#sub[3]) are informative.